AirOxi Floating Diffuser Grid is ready to use aeration system. It is fitted with aeration tubes and a blower on a frame that is floating above the surface of the water. The blower and motor are part of this aeration system and outside the water, while the aeration tubes are connected with piping at a depth of 1 mtr below the surface of the water. Each Floating Diffuser Grid for commercial aquaculture gives 80m3 of air flow per hour. Even if we consider a low dissolution of oxygen at 5% , this is a substantial increase in the level of DO every hour. Moreover, the floating design ensures that the aeration is uniform at a depth of 1 mtr depth all through the pond and you do not have to adjust the height of the tubes like you will need to do with an external blower.
The SS 304 frame (or MS with PP coating frame) is long lasting and sturdy. The blower is a special design to get high flow at very low power. And because the blower is mounted right above the AirOxi Tubes, there is no leakages or loss of air in the system. All these ensure that the Floating Diffuser Grid gives very high aeration at a very low.